Presentations with beamer
Build a slide deck in LaTeX with the beamer class: frames, a title slide, content that appears step by step, highlighted blocks, themes, and side-by-side columns.
Frames
A beamer document is a sequence of frame environments. Each frame is one slide, or several if its content is revealed in steps. The frame title goes in braces after \begin{frame}.
\documentclass[aspectratio=169]{beamer}
\begin{document}
\begin{frame}{Why measure tides?}
\begin{itemize}
\item Harbours need safe depths for every sailing.
\item Flood defences are sized from the highest levels.
\item Long records show how sea level is changing.
\end{itemize}
\end{frame}
\end{document}aspectratio=169 gives widescreen slides. Without it, slides are 4:3. Everything you know from other lessons works inside a frame: math, lists, tables, \includegraphics. Text is set in sans-serif, at a size meant for a projector.
The title slide
Set the details in the preamble, then print them with \titlepage inside a frame.
\documentclass[aspectratio=169]{beamer}
\usetheme{Madrid}
\title{Tide gauges on a budget}
\subtitle{Results from the first year}
\author{L. Haddad}
\institute{Coastal Lab}
\date{12 May 2025}
\begin{document}
\begin{frame}
\titlepage
\end{frame}
\end{document}\section and \subsection go between frames. They print nothing on a slide. They feed the outline, which \tableofcontents prints in a frame, and the navigation bars that some themes show.
Reveal content step by step
Overlays split one frame into several slides. \pause hides everything after it until the next slide. For finer control, an overlay specification in angle brackets says on which slides something is shown: <2> is slide 2 only, <2-> is slide 2 onward, and <1,3> is slides 1 and 3.
\documentclass[aspectratio=169]{beamer}
\setbeamercovered{transparent}
\begin{document}
\begin{frame}{Method}
\begin{enumerate}
\item<1-> Mount the sensor above the highest tide.
\item<2-> Log the distance to the water every minute.
\item<3-> Subtract the readings from the mounting height.
\end{enumerate}
\uncover<3->{The result is the water level.}
\end{frame}
\end{document}This frame becomes three slides, and the preview shows the first. \setbeamercovered{transparent} prints hidden content faintly instead of leaving it out, which is why you can see the later steps.
| Command | Effect |
|---|---|
\pause | Stop here. The rest appears on the next slide |
\item<2-> | Show this item from slide 2 onward |
\begin{itemize}[<+->] | Reveal the items one per slide, with no numbers to maintain |
\uncover<2->{…} | Show from slide 2, but reserve the space on every slide |
\only<2>{…} | Insert on slide 2 only. No space is reserved on other slides |
\alert<2>{…} | Highlight on slide 2 |
Blocks
Blocks set a statement apart in a titled box. There are three kinds, and the theme decides their colors.
\documentclass[aspectratio=169]{beamer}
\usetheme{Madrid}
\begin{document}
\begin{frame}{Findings}
\begin{block}{Accuracy}
The gauge agrees with the reference to within 2\,cm.
\end{block}
\begin{alertblock}{Limitation}
Readings drift when the sensor is in direct sun.
\end{alertblock}
\begin{exampleblock}{Example}
On 3 March the error stayed below 1\,cm all day.
\end{exampleblock}
\end{frame}
\end{document}\alert highlights a few words in running text. The theorem, definition, and proof environments are predefined and are drawn as blocks.
Themes
One line changes the look of the whole deck. \usetheme picks the layout, and \usecolortheme changes the palette.
\documentclass[aspectratio=169]{beamer}
\usetheme{Singapore}
\usecolortheme{beaver}
\setbeamertemplate{navigation symbols}{}
\begin{document}
\section{Results}
\begin{frame}{A different theme}
The content is the same. Only the preamble changed.
\begin{block}{Accuracy}
The gauge agrees with the reference to within 2\,cm.
\end{block}
\end{frame}
\end{document}Themes that ship with beamer include default, Madrid, Boadilla, Berlin, Singapore, Copenhagen, CambridgeUS, and Warsaw. Color themes include beaver, crane, dolphin, orchid, rose, seahorse, and whale. The \setbeamertemplate line above removes the row of small navigation icons from the bottom corner.
Columns
The columns environment places content side by side. Each column takes a width. The [T] option aligns the columns at the top.
\documentclass[aspectratio=169]{beamer}
\begin{document}
\begin{frame}{Site}
\begin{columns}[T]
\begin{column}{0.45\textwidth}
\includegraphics[width=\linewidth]{example-image}
\end{column}
\begin{column}{0.5\textwidth}
\begin{itemize}
\item North pier, 4\,m above datum
\item Solar powered
\item Data sent every hour
\end{itemize}
\end{column}
\end{columns}
\end{frame}
\end{document}Common mistakes
- Putting
verbatimorlstlistingin a plain frame. TeX stops with a confusing error such as "File ended while scanning use of @xverbatim", reported at the end of the file and not at the frame. Mark the frame as fragile:\begin{frame}[fragile]. - Expecting
\sectionto print a heading. It prints nothing in beamer. Put the title on the frame, and use\tableofcontentsif you want an outline slide. - Using
\onlyfor text in the middle of a slide. Content after it jumps when the text appears, because no space was reserved. Use\uncover. - Filling a slide until it overflows. Beamer does not break a frame across slides. The extra content runs off the bottom with only an "Overfull \vbox" warning. Split the frame, or add the
allowframebreaksoption for long lists such as references.