Advanced tables
After this page you can merge cells, wrap long text inside a column, adjust spacing, shade rows, let a table run over several pages, and turn a wide table on its side.
Cells that span columns and rows
\multicolumn{n}{spec}{text} replaces n cells with one, formatted by its own column letter. \cmidrule{a-b} from booktabs draws a rule under columns a to b only. For a cell that spans rows, the multirow package provides \multirow{n}{*}{text}: put it in the first row and leave the cells below it empty.
\begin{tabular}{@{}llrr@{}}
\toprule
& & \multicolumn{2}{c}{Hours} \\
\cmidrule(l){3-4}
Lab & Instrument & 2023 & 2024 \\
\midrule
\multirow{2}{*}{North} & Microscope & 40 & 52 \\
& Centrifuge & 12 & 9 \\
\addlinespace
South & Microscope & 25 & 31 \\
\bottomrule
\end{tabular}The (l) after \cmidrule trims the rule slightly on the left, which keeps neighboring rules apart. Use (r) or (lr) for the other sides. \multicolumn{1}{c}{text} is also the way to change the alignment of a single cell, such as a centered header over a right-aligned column.
Columns that wrap
l, c, and r columns never break a line, so one long cell makes the whole table too wide. A p{4cm} column is 4 cm wide and wraps its text. With the array package, m{4cm} and b{4cm} do the same but align the cell with its row at the middle or the bottom instead of the top.
Working out widths by hand is tedious. The tabularx package takes the total width of the table and shares what is left among the X columns.
\documentclass[varwidth=11cm,border=10pt]{standalone}
\usepackage{booktabs}
\usepackage{tabularx}
\begin{document}
\begin{tabularx}{\linewidth}{@{}lX@{}}
\toprule
Term & Meaning \\
\midrule
Float & An object that LaTeX may move to a place
where it fits, such as a figure or a table. \\
Rule & A straight line. In a table, rules separate
the header from the body. \\
\bottomrule
\end{tabularx}
\end{document}Narrow wrapped columns are justified, which leaves wide gaps between words. Set them ragged right by putting a declaration in front of the column: >{\raggedright\arraybackslash}p{4cm} or >{\raggedright\arraybackslash}X.
Spacing
Two settings control the density of every table. \tabcolsep is the padding on each side of a column (6 pt by default), and \arraystretch multiplies the row height. Change them inside braces to keep the effect local.
\begin{tabular}{lr}
Oak & 31 \\
Maple & 7 \\
\end{tabular}
\qquad
{\setlength{\tabcolsep}{14pt}%
\renewcommand{\arraystretch}{1.5}%
\begin{tabular}{lr}
Oak & 31 \\
Maple & 7 \\
\end{tabular}}For one row, add space after it with an optional length on the row end, \\[4pt], or use \addlinespace from booktabs.
Color
Load xcolor with the table option. \rowcolor shades one row, \cellcolor one cell, and \rowcolors{2}{gray!12}{white} colors odd rows gray and even rows white from row 2 onward.
\documentclass[border=10pt]{standalone}
\usepackage[table]{xcolor}
\begin{document}
\rowcolors{2}{gray!12}{white}
\begin{tabular}{lrr}
\rowcolor{blue!20}
Month & In & Out \\
January & 120 & 95 \\
February & 80 & \cellcolor{orange!40}140 \\
March & 110 & 102 \\
\end{tabular}
\end{document}Use shading sparingly, and not together with booktabs rules: the space around those rules stays white and cuts through the color.
Tables longer than a page
A tabular cannot break across pages. The longtable package provides an environment that can. It replaces both table and tabular, takes its own \caption, and lets you define what is repeated at each page break.
\documentclass{article}
\usepackage[paperwidth=9cm,paperheight=6.5cm,margin=8mm]{geometry}
\usepackage{booktabs}
\usepackage{longtable}
\begin{document}
\begin{longtable}{@{}lr@{}}
\caption{Rainfall in June.} \\
\toprule
Day & Rain (mm) \\
\midrule
\endfirsthead
\toprule
Day & Rain (mm) \\
\midrule
\endhead
\midrule
\multicolumn{2}{r@{}}{\emph{continued}} \\
\endfoot
\bottomrule
\endlastfoot
1 June & 0.0 \\
2 June & 2.4 \\
3 June & 11.8 \\
4 June & 0.6 \\
5 June & 0.0 \\
6 June & 7.1 \\
7 June & 3.3 \\
8 June & 0.0 \\
9 June & 5.9 \\
10 June & 1.2 \\
\end{longtable}
\end{document}Everything before \endfirsthead opens the table, and everything before \endhead opens each later page. \endfoot closes every page except the last, which \endlastfoot closes. The rows follow. The page here is made small with geometry so that the break shows.
longtable needs more than one compile
The column widths are carried from one compile to the next, so a longtable can look uneven until TeX has run again. TeXeR runs the extra passes for you.
Wide tables
To save width, turn the header cells with \rotatebox from graphicx.
\begin{tabular}{@{}lccc@{}}
\toprule
Student & \rotatebox{60}{Algebra}
& \rotatebox{60}{Geometry}
& \rotatebox{60}{Statistics} \\
\midrule
Amira & A & B & A \\
Jonas & B & B & C \\
\bottomrule
\end{tabular}If the table is still too wide, give it a landscape page. The landscape environment of the pdflscape package starts a new page, sets its content sideways, and turns that page in the PDF viewer so that it reads normally on screen.
\usepackage{pdflscape}
\begin{landscape}
\begin{table}
\centering
\caption{Results for all twelve sites.}
\begin{tabular}{lrrrrrrrrrrrr}
% a wide table
\end{tabular}
\end{table}
\end{landscape}Common mistakes
\raggedrightin a column without\arraybackslash.\raggedrightchanges what\\means, so the row end fails with! Misplaced \noalign.or an extra-alignment error. Always write>{\raggedright\arraybackslash}.- A
\multicolumnthat loses a rule or@{}. Itsspecreplaces the column's whole definition for that cell. Repeat any|or@{}the column had, as in\multicolumn{2}{r@{}}{…}. - A
longtableinsidetable. A float cannot break across pages, so the table runs off the bottom. Uselongtableon its own. - Shrinking a table with
\resizebox. It fits, but the text is a different size from the rest of the document. Wrap text, abbreviate headers, or rotate the table instead.